Sealers Choice

Read entire label before using. Apply using a paint pad applicator, sponge or brush. Allow it to penetrate for up to 5 minutes. Wipe surface completely dry using clean, dry cotton, paper or microfiber towels after each application. Porous surfaces may require additional applications. Conduct a test to see if surface is completely sealed after 2 hours by applying drops of water on the surface. If it penetrates, an additional application is required.

As a sealer or grout release for all natural stone surfaces, unglazed tile, porcelain, clay pavers, concrete, brick, masonry, and grout. For interior and exterior use.

Limitations to the Product

Do not allow sealer to come in contact with any non-recommended surface. If product is allowed to dry on surface, a white film may form. If this occurs, scrub with Aqua Mix NanoScrub and a white nylon pad. Sealer will not prevent surface wear or etching from acids or caustic chemicals.

Approximately 65 to 190 sq. ft. per coat per pint depending on the type of stone, porosity and texture of surface, temperature, humidity, and method of application.